My Account

Fyne Audio F3-10

558.00€

For full-blooded home cinema action, the F3-10 subwoofer mates a 475 Watt Direct Digital (DDX) amplifier with a 250mm (10”) driver in a mid-sized cabinet. Featuring advanced DSP technology, Bass Boost mode for LFE and a large, down-firing low-turbulence port for consistent in-room performance, the F3-10 is ideal for partnering with a wide range of home cinema speakers.

F3-10-Front-Grille-Off-600×600F3-10-Front-Grille-Off-600×600
F3-10-Front-Grille-On-3Q-600×600F3-10-Front-Grille-On-3Q-600×600
F3-10-Front-Grille-On-bookshelf-600×600F3-10-Front-Grille-On-bookshelf-600×600
F3-10-Rear-600×600F3-10-Rear-600×600

Out of stock

SKU: F3.10 Category:

Description

Output Power 475W
Enclosure Type Vented, downwards firing
Enclosure Volume 34 litre (1.2 cu. ft.)
Bass boost (+3dB) 35- 70Hz
Low Frequency Response (-6dB typical in room) 32Hz
Drive unit complement 250mm (10”)
Inputs 2 x Phono L & R stereo, 1 x mono LFE
Input Filter 80Hz 2nd Order Low Pass, with LFE Provision
Standby Power Consumption <0.5W (ErP Approved)
Mains Voltage 220-240V / 50Hz Nominal
Maximum Power Consumption (Watt) 240W
Auto Mute After Approximately 10 mins in Absence of Input Signal
Dimensions – HxWxD 410 x 340 x 393mm (16.1 x 13.4 x 15.5”)
Weight – Each 16kg (35.3lbs)

Notes:
Bookshelf dimensions includes grille, terminals, and any plinth, but excludes feet. Floorstand dimensions includes grille, terminals and plinth, but excludes spikes. Subwoofer dimensions include feet. All information was correct at the time of publishing. Fyne Audio Ltd reserve the right to amend details of the specification without notice in line with our policy for continuous improvements.

Additional information

Weight 16 kg
Dimensions 340 × 393 × 410 cm

Related products