Mipro ACT-80H Wideband Digital Handheld Transmitter

Innovatively designed metal housing in MIPRO’s distinctive aesthetic and ergonomic style.
Standard champagne-color housing. Optional custom-made colors are available.
Interchangeable capsule module with premium condenser or dynamic options for easy and fast changeovers.
The unique multi-layered metal grille protects the capsule against impact, rolling and pop noise, ensuring clarity of sound.
Patented capsule suspension design virtually eliminates vibration and handling noises.
Backlit LCD displays all operational parameter information.
Three selectable gain settings: 0 dB (same as microphone sensitivity), +3 dB, +6 dB.
Three selectable mute settings: Auto, Manual & Disabled. “Auto” mute activates automatically when handheld transmitter points down towards the ground.
The bottom housing with built-in high-efficiency antenna features power switch, mute and setup buttons for programmable gain, limiter, low-cut and RF output power.
Patented end-cap cover with color-coded channel identification clips onto the mic and can be reversed to allow shielding of power on/off or mute switches during performance. Detach the end-cap cover for parameters set-up.

	Housing	Aluminum
	Mic Capsule Module	Interchangeable Condenser or Dynamic
	Display	Green backlit LCD displays various parameters
	Frequency Range	UHF 480 ~ 934 MHz (country dependent)
	Bandwidth	64 MHz
	Encryption	256 bits
	Modulation Mode	New digital modulation
	Audio Compression	DSP Inertial coding
	RF Power Output	10 mW / 50 mW switchable (country dependent), 50 Ω loaded
	Spurious Emission	< 4 nW
	Gain Setting	6 dB, 3 dB, 0 dB (3 settings). 0 dB = microphone capsule sensitivity
	Dimensions (Ø × L)	51 × 258 mm / 2 × 10 “
	Net Weight	Approx. 323 g / 11.4 oz
	Battery	2 × AA alkaline
	Operating Time	Min. 12 hours
	Note	Refer to actual product in the event of product discrepancy. Frequency range and maximum deviation comply with the regulations of different countries.

RH-87 – SW-20 – MD-20 – MS-20