Ave Audio (Stuttgart) – Ascolto FF0870
Description:
The digital steering column Ascolto FF0870 is particularly suitable to ensure an extended coverage in large environments, such as churches with long aisles, cathedrals, basilicas and in general where it needs simultaneously a very incisive beam and a bright tone.
FF0870 performs 8-channel DSP beam filtering to steer the vertical radiation pattern, matching the desired listening pattern, making column high directive and featuring main propagation lobe less dependent on the frequency.
FF0870 is equipped with 8 high quality, waterproof, coaxial loudspeakers, each one mounting 4” neodymium woofer + 1’’ dome tweeter, capable to transmit perfectly voice as well as music.
FF0870 uses 8 x 70 Wrms class-D audio amplifiers with excellent THD+N and high efficiency (90%). They are completely pop free and protected against short-circuit and thermal over-load.
FF0870 mounts high-reliable, switching power supply with universal input (90 – 264 VAC) to ensure the necessary „power” demand (360 W continuous / 430 W peak) to the amplifier units.
Beside the primary analog line input, FF0870 has an auxiliary audio input at 100 V level or a built-in Dante input (choose respectively FF0870 – 100 V or FF0870 – Dante version). Thus, it can be integrated and connected into an existing speaker line or into a Dante network.
FF0870 setup comes easy throughout the AVE Line Array User Control PC software, via RS485 connection.
AVE Line Array User Control includes:
• Beam forming control (tilting/broadening of vertical pattern);
• Anti-Reverberation System ARS to increase the voice intelligibility in reverberant environments.
• Air attenuation compensation;
• Volume control;
• Solo control;
• Delay control;
• 8-biquads user equalizer with high/low shelving and parametric filters;
• Music adaptive equalizer with a smart and robust speech/music detector.
FF0870 cabinet is aluminum extrusion and powder coated with desired RAL color.
All digital steering column loudspeakers Ascolto are designed and manufactured in Germany.
Data sheet:
Acoustic Specifications
|
|
Frequency Bandwidth | 80 Hz – 20 kHz (±2 dB) |
max. SPL (Nominal/Peak) | 103 dB/106 dB (A-Weighted at 10 m) 100 dB/103 dB (A-Weighted at 20 m) 98 dB/101 dB (A-Weighted at 30 m) |
Coverage horizontal (fixed) | 110° |
Coverage vertical (adjustable) | Tilting Angle: –60° to 60° Opening Angle: 20° to 40° |
Typical Throw | 20 m |
Maximum Throw | 25 m |
Dynamic Range | 102 dB |
Transducers | 8 x 4,0“ woofer + 1,0”dome tweeter neodymium |
Sensitivity 1W/1 m | 91.5 dB |
Electrical Specifications
|
|
Audio Input 1 | Line |
Input Level Nominal | 0 dBu (2.19 Vpp) |
Input Level Maximum | 10 dBu (6.92 Vpp) |
Type | Balanced |
Impedance | 20 kOHm at 1 kHz |
Audio Input 2 | 100 V |
Input Level Nominal | 39.2 dBu (200 Vpp) |
Type | Balanced with Transformer |
Impedance | 20 kOhm at 1 kHz |
Audio Input 3 | Dante Audio Networkiing |
Network | Dante Audio over IP |
Transport Layer | Ethernet |
Dante Latency | 1, 2 or 5 ms (configurable using Dante Controller) |
Sampling rates | 48 kHz |
Bit Depths | 24 |
Power Amplifier
|
|
Type | PWM (Class D) |
Output power | 8 x 70 W rms |
Power Efficiency | 92% |
THD+N | 0.025% at 10 Wrms/channel, 1 kHz |
Input signal | Balanced |
Channel protections | Thermal Shutdown (Tjunction< >150°C) Output Short Circuit |
DSP Module
|
|
DSP Processor | 48 bit Fixed Point DSP 76 bit internal AccumulatorP 145 Mhz |
Sample Rate | 48 kHz |
A/D Conversion | Resolution: 24 bit linear PCM
Conversion: 1 bit delta-sigma 512x Sample: 48 kHz SNR: 102 dB (A-Weighted) |
D/A Conversion | Resolution: 24 bit linear PCM
Conversion: upsampling 128x Sample rate: 48 kHz SNR: 105 dB (A-Weighted) |
Signal Processing | Beam Forming Filtering Input Equalization (10 Biquad) Volume: (-120 dBFS to 0 dBFS) Delay (0 m to 30 m, Step 0.1 m) Dynamic Compressor 2-Bands Input Signal Activity Detector |
Control Module
|
|
Processor | 32 bit ARM-Cortex M3
RISC 50 MHz |
Setup Network Interface | RS485, Half Duplex, 115200 baud/s 120 Ω Parallel Termination (recommended for long distance) This network interface is used by AVE Line Array User Contol software to manage beam setup and other audio features. |
Dante Network Interface | Ethernet, 100 Mbit/s (available only in Ascolto – Dante Series). |
Processor Activities | DSP Firmware Booting DSP Status Monitoring PWM Power Amplifier Functions Controlling PWM Power Amplifier Status Monitoring Audio Input Channel Functions Controlling Dante-Chip Ultimo XXT Control (in Ascolto – Dante Series) Auto Stand-By Controlling RS485 Communication Infrared Communication Panel LEDs Controlling Firmware Updating |
Connectors
|
|
Audio Inputs Connector | 3-pole, 3.81 mm-pitch |
Audio Inputs Pinout7 | pin 1: hot signal (+) pin 2: cold signal (-) pin 3: earth (chassis ground) |
RS485 Network Connector | 3-pole, 3.81 mm-pitch |
RS485 Network Pinout | pin 1: data + pin 2: data – pin 3: digital ground |
Dante Network Connector | 8 pin Ethernet RJ45, female connector |
Mains Connector | Socket Wago cod. 770-103 with strain relief housing, 3-pole, 4,00 mm², ratings 250 VAC, 25 A, IEC/EN 60664-1, UL 1977 |
PSU-Module:
|
|
AC Range | 90 VAC to 264 VAC (Universal Input) |
Input Frequency | Input 47 Hz to 67 Hz |
Efficiency | 91% typ at 230 VAC |
Power Factor Correction | Yes |
Input Current at Full Load | 4.0 A typ at 115 VAC 2.0 A typ at 230 VAC |
Power Consumption | Continuous: 360 VA Peak: 468 VA Idle: 12 VA Stand-By: 4 VA |
Protection | Thermal Protection Short Circuit Protection Output Current Limiting Under-Voltage Lock Out |
Main Fuse | 1 × 6.3 A (slow blow) |
Electromagnetic compatibility | EN 55022, class B, FCC part 15, level B |
(EMC), Emissions | IEC/EN 61000-3-2 class B |
General Specifications
|
|
Height | 1174 mm |
Width | 122 mm |
Depth | 120 mm |
Weight | 10,3 Kg (22.7 lbs) |
Cabinet | Powder Coated Aluminum Extrusion |
Colour | RAL 9010 |
Special colour | available for an additional charge |
Temperature Range | 0°C to 40°C (32°F to 102°F) |
Protection class | IP 54 |
Certificates | CE |